Home > Knowledge > Content
What are the requirements for using foam tape
Dec 21, 2018

1. Foam tape masking the process:  PE foam or EVA is used as the base material, and the product is coated with solvent-based pressure-sensitive adhesive on one side or both sides, and then made of release paper.


2.  Foam tape has the function of sealing and damping when used. It is very suitable for use in office, home and other places to paste and paint when used.


3.  The bonding surface should be kept absolutely clean and dry during use. It can be scrubbed with alcohol or acetone. The surface after cleaning should be completely evaporated before the solvent can be pasted.


4.During the operation of the foam tape, the contact between the finger and the rubber surface should be avoided. The product must be pressed hard after the adhesive is applied, so as to ensure that the full contact of the rubber surface and the wet temperature should not be lower than 10 ° C, otherwise The adhesive tape and the bonding surface can be appropriately heated by a hair dryer.


Related Industry Knowledge